2 After entering the phrase, press CANCEL to remove the cursor from the character palette to the letter input area.
3 Press END SEARCH for 2 seconds or more.
“Entry!” appears in the display and the cursor flashes after the phrase you just stored.
4 If you continue labeling operation, do steps 5 to 8 of “Labeling recordings” (page 19).
On the remote control
1 Follow steps 1 to 6 of “On the remote control” (page 20) in “Labeling recordings” to enter a phrase.
2 After entering the phrase, press X for 2 seconds or more.
3 If you continue labeling operation, do steps 5 to 7 of “On the remote control” (page 20) in “Labeling recordings”.
Storing phrases from a previously labeled track, group, or disc
On the recorder
1 Follow steps 1 and 2 of “Relabeling recordings” (page 21) and display the track, group, or disc name that contains the phrase that you want to store.
2 Press ./> repeatedly to move the cursor to the right of the phrase.
3 Press END SEARCH for 2 seconds or more to store the phrase.
On the remote control
1 Follow steps 1 and 2 of “On the remote control” (page 21) in “Relabeling recordings” (page 21) and display the track, group, or disc name that contains the phrase that you want to store.
2 Pull and turn the control towards VOL + or VOL – to move the cursor to the right of the phrase.
3 Press X for 2 seconds or more to store the phrase.
Entering and storing phrases
On the recorder
1 Press the jog dial.
2 Turn the dial until “EDIT” flashes in the display, and then press to enter.
3 Turn the jog dial until “Name Bank” flashes in the display, and then press to enter.
4 Follow steps 5 to 8 of “Labeling recordings” (page 19) to enter a phrase. “Entry!” appears in the display and the phrase is stored.
On the remote control
1 Press DISPLAY for 2 seconds or more.
2 Turn the control repeatedly until “EDIT” flashes in the display, and press
xto enter.
3 Turn the control repeatedly until “Name Bank” flashes in the display, and then press x to enter.
4 Do steps 5 to 7 of “On the remote control” (page 20) in “Labeling recordings” to enter a phrase.
Note
If you have entered and then stored a phrase, you cannot retrieve it by following the procedure of “Searching a phrase by displaying the stored phrase one by one”. When you retrieve a stored phrase, follow the procedure of “Searching for a phrase by its first letter.”
Using a retrieved phrase for labeling
There are two ways to retrieving phrases for labeling.
•Searching for a phrase by displaying the stored phrase:
You can retrieve a phrase by keyword, and then use the phrase in a new label.
•Searching for a phrase by its first letter:
You can retrieve a phrase by its first letter, and then use the phrase in a new label.
22