About the character palette
During operations on the recorder, characters can be selected from the character palette in the display.
Since only a part of the character palette is visible on the display, use the
For configuration of the character palette, see page 46 in English text.
Notes
•“NAME FULL” appears when you try to enter more than 1,700 characters on a disc. Enter a shorter name for the track, group, or disc, or set the “LP Stamp” setting to “Stamp OFF” so that “LP:” is not be added at the beginning of the track name.
•When labeling a disc which has been recorded using the group function, make sure group mode is on in order to prevent the group management information from being overwitten by mistake.
•If you enter the symbol “//” between the characters in disc names such as “abc// def,” you may be unable to use the group function.
Labeling recordings
On the recorder
1 Insert a disc and do the followings.
To label a track:
Start playing or recording the track you want to label, and then label the track while the recorder is playing or recording.
To label a group:
Turn the group mode on (page 14) and start playing or recording the track within the group you want to label, and then label the group while the recorder is playing or recording.
To label a disc:
Label a disc while the recorder is stopped or recording.
If you label a disc with group settings, turn the group mode on (page 14).
2 While the recorder is stopped, press the jog dial.
3 Turn the jog dial until “EDIT” flashes in the display, and then press to enter.
4 Turn the dial until the following item appears in the display, and then press to enter.
When labeling a track:
“ : Name”
When labeling a group: “ : Name”
When labeling a disc:
“ : Name”
The cursor flashes in the letter input area and the track, group, or disc is ready to be labeled.
5 Press x.
The cursor shifts from the letter input area to the character palette.
6 Select a letter with the
The selected letter appears in the letter input area and the cursor moves to the next input position.
The buttons used for character input and their functions are listed below.
Functions1) | Operations |
| |
To move the cursor in |
| ||
the character palette. | Turn the jog dial (move |
| |
| the cursor upward or |
| |
| downward)2). |
| |
To select a character | Turn the jog dial. |
| |
in the letter input area. |
|
|
|
|
|
|
|
To enter a letter. | Press N. |
| |
| Press the jog dial. |
| |
|
|
|
|
To move the cursor | Press x. |
| |
from the letter input |
|
|
|
area to the character |
|
|
|
palette. |
|
|
|
|
|
|
|
To move the cursor | Press CANCEL. |
| |
from the character |
|
|
|
palette to the letter |
|
|
|
input area. |
|
|
|
|
|
|
|
To enter a name. | Press N or the jog dial |
| |
| for 2 second or more. |
| |
|
|
|
|
To insert a blank space | Press VOLUME +. |
| |
before the cursor in |
|
|
|
the letter input area. |
|
|
|
|
|
|
|
To delete a letter in the | Press VOLUME |
| |
letter input area. |
|
|
|
|
|
|
|
|
| continued |
|
19