To display the current time

On the recorder

1When the recorder is not operating or while recording, press the jog dial.

2Turn the dial until “DISPLAY” appears in the display, and then press to enter.

3Turn the jog dial until “Clock” flashes in the display, and then press to enter. The current time appears in the display.

On the remote control

1Press DISPLAY repeatedly until current time appears in the display.

To display the time in the 24-hour system

Press T MARK while setting the clock. To change the clock to the 12-hour system, press T MARK again.

To maintain the correct time

Once you set the clock, it will keep correct time as long as the recorder is connected to a power source, such as the rechargeable battery, alkaline dry battery, or AC power adaptor. However, if no power source is connected, the clock setting will change back to the factory setting after about 3 minutes.

When changing the rechargeable battery or alkaline dry battery, make sure to do it within 3 minutes.

Notes

•Make sure the time is correctly set if you want the time stamp to be accurately recorded for an important recording.

•Under normal conditions, the clock may vary by about plus or minus 2 minutes per month.

BVarious ways of playback

Searching for a specific track or a position quickly (Quick Search)

See the illustrations in English text (page 35).

You can do two kinds of quick search.

•Index search — Searching quickly while monitoring the track numbers or track names.

•Time search — Searching quickly while monitoring the elapsed time.

Selecting the search mode

The search mode can be selected only on the remote control while the recorder is stopped, playing, or play-paused. The recorder is factory set to “Index”.

1 Press DISPLAY for 2 seconds or more.

2 Turn the control repeatedly until “SEARCH” flashes in the display, and then press x to enter.

3 Turn the control repeatedly until “Index”(index search) or “Time”(time search) flashes in the display, and then press x to enter.

Searching for a specific track while monitoring track numbers or track names (Index Search)

To do an index search, set the search mode to “Index” in advance (page 13).

On the recorder

1 Turn the jog dial until the desired track appears in the display, and then press the dial.

The selected track name appears in the display and the recorder starts playing by pressing the jog dial.

If the track has no name, the track number appears in the display.

13