3 Turn the jog dial until “EDIT” flashes in the display, and then press to enter.

4 Turn the jog dial until “ : Move” flashes in the display, and then press to enter.

The group number to which the currently playing track belongs flashes in the middle section of the display. If the group has been labeled, press > to display the group name. Press . to return to the group number display.

5 Turn the jog dial to select the destination point on the disc, and then press to enter.

On the remote control

1 Follow the procedure of “To activate the group mode” (page 97) to turn the group mode on.

2 While playing a track within a group whose order you want to change, press DISPLAY for 2 seconds or more.

3 Turn the control repeatedly until “EDIT” flashes in the display, and then press x to enter.

4 Turn the control repeatedly until “GP : Move” appears in the display and then press x to enter.

5 Turn the control repeatedly to select a destination point on the disc, and then press x to enter.

To cancel moving

Press CANCEL on the recorder.

Press DISPLAY for 2 seconds or more on the remote control.

Adding a track mark

See the illustrations in English text (page 59).

You can add a track mark so that the part after the new track mark is counted as new track. You cannot add a track mark on a track that has been checked-out from your computer.

1 While playing or pausing an MD, press T MARK on the recorder at the point you want to mark.

“MARK ON” appears in the display, and the track mark is added.

To add track marks while recording (except while synchro- recording)

Press T MARK at the point you want to add a track mark. You can use Auto Time Stamp to add track marks automatically at specified intervals (except while digital recording).

Erasing a track mark

See the illustrations in English text (page 60).

When you record with analog (line) input, unnecessary track marks may be recorded where recording level is low. You can erase a track mark to combine the tracks before and after the track mark. You cannot erase a track mark on a track that has been checked-out from your computer.

1 While playing the track with the track mark you want to erase, press X to pause.

2 Find the track mark by pressing . slightly.

“MARK” appears in the display for 2 seconds.

3 Press T MARK to erase the mark. “MARK OFF” appears in the display. The track mark is erased and the two tracks are combined.

To cancel moving

Press CANCEL on the recorder.

Press DISPLAY for 2 seconds or more on the remote control.

Notes

•When you erase a track mark between the two consecutive tracks that are registered into different groups, the second track is re- registered into the group containing the first track. In addition, if you combine a track that is registered to a group with a track that is not registered to a group (two consecutive tracks), the second track takes the same registration setting (such as the recording date, track name, etc.) as the first track. However, when the group function is on, you can only combine tracks within the selected group.

•You cannot erase track marks according to the system limitations.

27