2 If you want to repeat playback in the selected play mode, press RPT/ENT. “ 
” appears in the display.
Creating a Program (Program Play)
You can set the program with up to 20 tracks.
On the recorder
1 Press the jog dial while “PGM” flashes in the display at step 2 of “Selecting a play mode”.
2 Turn the jog dial to select a track, and then press to enter a track number.
3 Repeat step 2 to program more tracks.
4
On the remote control
1 While the recorder is playing, press PLAYMODE repeatedly until “PGM” flashes in the display.
2 Turn the control repeatedly to select a track, and then press RPT/ENT to enter a track number.
3 Repeat step 2 to program more tracks.
4 Press RPT/ENT for 2 seconds or more.
Notes
•All program settings are lost when the lid of the recorder is opened.
•If you turn group mode on or off during the setting of a program, program setting mode will be canceled, but the program contents up to that point will remain.
•You cannot turn group mode on or off while programming tracks.
•If you turn group mode on during program play, the program play is canceled.
Adjusting treble and bass (Digital Sound Preset)
See the illustrations in English text (pages 40 and 42).
You can adjust the treble and bass to suit your taste. The recorder can store two sets of treble- bass adjustments, which can then be selected later during playback.
The sound can be adjusted in 8 steps
...±0, ...+2, +3). Settings can be stored to the Personal Disc Memory.
Selecting the sound quality
Factory settings of the Digital Sound Preset are as follows:
•“SOUND1” : bass +1, treble ±0
•“SOUND2”: bass +3, treble ±0
On the recorder
1
2 Turn the jog dial until “SOUND” flashes in the display, and then press to enter.
3 Turn the jog dial until “SOUND 1” or “SOUND 2” flashes in the display, and then press to enter.
On the remote control
1 Press SOUND on the remote control repeatedly to select “SOUND 1” or “SOUND 2”.
Adjusting the sound quality
On the recorder
1
2 Turn the jog dial until “SOUND” flashes in the display, and then press to enter.
3 Turn the jog dial until “SOUND 1” or “SOUND 2” flashes in the display.
The display shows the currently selected T (treble) and B (bass) settings.
4 Select “T” or “B” pressing x or X. You can change the adjust of the item in which the cursor is flashing.
16