BMD playing

Playing an MD right away!

See the illustration in English text (page 21).

If you want to use the rechargeable battery, be sure to recharge them before playing (page 4).

1 Insert an MD.

1Press OPEN to open the lid.

2Insert an MD with the label side facing front, and press the lid to close.

2 Start playing.

1Press N on the recorder. Turn the control towards N> on the remote control.

A short beep sounds in the headphones/earphones.

2Press VOLUME +/– on the recorder to adjust the volume. Pull and turn the control towards VOL + or towards VOL – on the remote control.

To stop play, press x.

After you press x to stop, the recorder will automatically turn off in about 10 seconds (when using batteries) or about 3 minutes (when using AC power adaptor).

Playback starts from the point you last stopped playing. To start playback from the beginning of the disc, press N for 2 seconds or more on the recorder, or turn and hold the control towards N> for 2 seconds or more on the remote control.

To

Do this

Select the track

Turn the jog dial and press to

directly viewing

enter.

the track

 

number or

 

name.

 

 

 

Find the

Press .. Turn the control

beginning of the

towards . on the remote

current track1)

control.

Find the

Press >. Turn the control

beginning of the

towards N> on the

next track2)

remote control.

To

Do this

Go backwards

Keep pressing ..

while playing

Turn and hold the control

 

towards . on the remote

 

control.

 

 

Go forward

Keep pressing >. Turn

while playing

and hold the control towards

 

N> on the remote

 

control.

 

 

Pause

Press X. Press X on the

 

remote control. Press X

 

again to resume play.

 

 

Remove the MD

Press x. Press x on the

 

remote control. Then press

 

OPEN to open the lid.3)

1)If you press . twice continueously while playing the first track of the disc, the recorder goes to the beginning of teh last track on the disc.

2)If you press > during the last track of the disc, the recorder goes to the beginning of the first track on the disc.

3)Once you open the lid, the point to start play will change to the beginning of the first track (except when the disc information has been stored in the Personal Disc Memory).

If the playback does not start

Make sure the recorder is not locked. If it is locked, slide the HOLD switch in the opposite direction of the arrow.

Suppressing the skips of the sound (G-

PROTECTION)

The G-PROTECTION function was developed to provide a higher level of shock resistance than that of existing players in order to allow the recorder to be used while jogging.

Note

The playback sound may skip if:

•the recorder receives stronger continuous shock.

•a dirty or scratched MiniDisc is played.

When using the headphones/earphones connect them directly to the recorder

1Press the jog dial, turn the dial until “AUDIO OUT” flashes in the display, and then press the dial again.

2Turn the jog dial until “HeadPhone” appears in the display.

3Press the jog dial again.

7