Settings selected in the “System Administrator Setup” screen
The settings selected in the “System Administrator Setup” screen are as follows. For details, see the respective pages.
Settings that | Function of setting | See page |
can be |
|
|
selected |
|
|
|
|
|
“2. Network | This makes settings related to | 20 |
Setup Menu” | the network. |
|
|
|
|
“3. | This makes settings related to | 20 |
Setup Menu” | the |
|
| and plasma display. |
|
|
|
|
“4. Menu | Select Japanese or English as | 21 |
Language” | the menu language. |
|
|
|
|
“5. Activate | Select whether or not to | 22 |
‘Automatic | enable the deletion of files for |
|
Delete’” | which an automatic deletion |
|
| date is set. |
|
|
|
|
“6. Delete All | This deletes all data from the | 22 |
Data” | unit. |
|
|
|
|
“7. Password | This sets a password. | 22 |
Setup” |
|
|
|
|
|
Carrying Out “Network Setup”
To make the settings relating to the network, use the following procedure.
1 In the “System Administrator Setup” screen, carry out any of the following.
•Press numeric button 2, then press the ENTER button.
•Using the v and V buttons, select “2. Network Setup Menu,” and press the ENTER button.
The “Network Setup” screen appears.
To return to the “System Administrator Setup” screen
Carry out any of the following.
•Press numeric button 1, then press the ENTER button.
•Using the v and V buttons, select “1. Back to System Administrator Setup,” and press the ENTER button.
2 Carry out steps 4 to 8 of the procedure in “Starting Up and Initial Settings” (page 10).
3 Carry out any of the following.
•To exit the menu display, press the MENU button.
•To return to the “System Administrator Setup” screen, press numeric button 1, or using the v and V buttons, select “1. Back to System Administrator Setup,” and press the ENTER button.
To enable the new network settings, a message prompt appears, asking if you want to reset the unit.
4 To reset immediately, select “Yes”; to reset later, select “No.”
The standby screen or “System Administrator Setup” screen appears after a reset (for “Yes”) or immediately (for “No”).
Carrying Out “RS-232C Setup”
In the
•
Select this when using the dedicated control protocol.
•Maintenance
Select this when the
•External (GPI) device control
Select this when the
•Plasma control
Select this when using a plasma display.
Use the following procedure.
1 In the “System Administrator Setup” screen, carry out any of the following.
•Press numeric button 3, then press the ENTER button.
•Using the v and V buttons, select “3.
20
System Administrator Setup
