This confirms the setting.
Activating “Automatic Delete”
Select whether or not to enable the deletion of files for which an automatic deletion date is set.
For details of the automatic deletion setting, refer to the Help information for the
Use the following procedure.
1 In the “System Administrator Setup” screen, carry out any of the following.
•Press numeric button 5, then press the ENTER button.
•Using the v and V buttons, select “5. Activate ‘Automatic Delete,’” and press the ENTER button.
The setting can now be changed.
2 Using the b and B buttons, select either of the following.
•“Yes”: Enable automatic deletion settings.
•“No”: Disable automatic deletion settings.
3 Press the ENTER button.
This confirms the setting.
Carrying Out “Delete All Data”
This deletes all data from the unit.
Use the following procedure.
1 In the “System Administrator Setup” screen, carry out any of the following.
•Press numeric button 6, then press the ENTER button.
•Using the v and V buttons, select “6. Delete All Data,” and press the ENTER button.
A message appears, prompting you to confirm the deletion of all data.
2 Using the b and B buttons, select “Yes” or “No,” and press the ENTER button.
•“Yes”: All data is deleted from the unit.
•“No”: The data is not deleted, and the original screen reappears.
Carrying Out “Password Setup”
Use the following procedure.
1 In the “System Administrator Setup” screen, carry out any of the following.
•Press numeric button 7, then press the ENTER button.
•Using the v and V buttons, select “7. Password Setup,” and press the ENTER button.
The “Password Setup” window appears.
2 With the numeric buttons, enter a
To correct an entry
Press the b button.
Each time you press this button, the last digit is deleted.
3 Enter the password created in step 2 once more, and press the ENTER button.
This sets the password.
22
System Administrator Setup
