ON/OFF (third switch from left): Enable (ON) or disable (OFF) the remote controller.
1/2 (rightmost switch): When using two
controller, set different remote controller codes for them.
For details, see “Preparations” (page 9).
Remote Controller
For details, see “Preparations” (page 9).
Note
Using the remote controller to control the
1 DISPLAY button
2 LIST button
3 MENU button
DISPLAY LIST MENU
PUSH
ENTER
0PLAY button
PAUSE
9 PAUSE button
4 ENTER/b, B, v, V control
PLAYSTOP
8Reverse shuttle 
5 STOP button playback button
1 | 2 | 3 |
| 6 Forward shuttle playback button |
|
|
|
| |
4 | 5 | 6 |
|
|
7 | 8 | 9 | 0 | 7 Numeric buttons |
1DISPLAY button
During movie/still playback: Pressing this button displays the title of the movie/still being played. Press once more to clear the display.
During playlist playback: Pressing this button displays the numerical position of the current playlist in the list of playlists shown on the “Playlists” screen.
(Example: “0003/0010” means playing playlist 3 out of 10 playlists.) Press once more to clear the display.
2LIST button
While the standby screen is displayed: Pressing this button shows the last displayed list screen. Subsequent presses change the displayed list screen, in the following sequence.
“Playlists” screen (list of playlists)
“Video” screen (list of movie files)
“Graphics” screen (list of still image files)
During playlist playback: Pressing this button displays details of the playlist. Press once more to clear the display.
3MENU button
When the menu is not displayed: Pressing this button switches to menu mode, and the “MENU” screen appears.
When the menu is displayed: Pressing this button switches out of menu mode, and the menu display disappears.
For details of the menu, see “Operation” (page 9).
Names and Functions of Parts
7
