16
ENGLISH

AI EDIT RECORDING

The AI edit recording function enables CD recording without
worrying about tape length and track length. When a CD is
inserted, the unit automatically calculates the total track length.
If necessary, the order of trac ks is rearranged so that no tr ac k is
cut shor t.
(AI: Ar tificial Intelligence)
AI edit recording will not start from a point halfwa y into the tape .
The tape must be recorded from the beginning of either side.
1

Insert the tape into deck 2.

Insert the tape with the side to be recorded on first f acing out
from the unit.

2 Press CD and load the disc(s).

3

Press CD EDIT/CHECK once.

“EDIT” and “AI” are displayed.
•When “PRGM” is displayed, press CD EDIT/CHECK.
4

Press DISC DIRECT PLAY 1-3 to select a disc.

5

Press numbered buttons 0-9 on the remote

control to designate the tape length.

10 to 99 minutes can be specified.
Example: When using a 60-minute tape, press 6 and 0.
In a few seconds, the tracks to be recorded on each side of
the tape are determined.
•f, g or MULTI JOG are also available to designate
the tape length.
6

Press w REC/REC MUTE to start recording on

the first side .

The tape is rewound to the beginning of the first side, the
lead segment is pla yed through for 10 seconds , and recording
starts . When the last track prog rammed f or side A is finished,
deck 2 enters the recording stop mode. After entering the
recording stop mode, go to step 7.
7

Press CD EDIT/CHECK to display the program for

the second recording.

“B” is displayed.
8

Turn over the tape in deck 2 and press w REC/

REC MUTE to start recording on the second side.

To stop recording

Press s. Recording and CD play stop simultaneously.

To clear the edit program

Press s CLEAR twice so that “EDIT” disappears on the displa y.

To check the order of the programmed track numbers

Before recording, press CD EDIT/CHECK to select side A or B,
and press f or g repeatedly.

To add tracks from other discs to the edit program

If there is any time remaining on the tape after step 5, you can
add tracks from other discs in the CD compartment .
1Press CD EDIT/CHECK to select side A or B.
2Press DISC DIRECT PLAY 1-3 to select a disc.
3Press numbered buttons on the remote control to select tracks.
A track whose playing time is longer than the remaining time
cannot be programmed.
4Repeat steps 2 and 3 to add more tracks.

Time on cassette tapes and editing time

The actual cassette recording time is usually a little longer than
the specified recording time printed on the label. This unit can
program tracks to use the extra time. When the total recording
time is a little longer than the tape’s specified recording time
after editing, the display shows the extra time (without a minus
mark), instead of the time remaining on the tape (with the minus
mark).
The AI edit recording function cannot be used with discs
containing 31 tracks or more. “TR OVER” is displayed if this is
attempted.
Tape length Remaining time
of recording Programmed
tracks for side A
Tape side
A: First recording side
B: Second recording side
Track number Programmed
track numbers
Program numberTape side