En
ENGLISH
9

AUDIO ADJUSTMENTS

VOLUME

Turn VOLUME on the main unit, or press VOL on the
remote control.
The volume level is displayed as a number from 0 to MAX (50).
The volume level is automatically set to 20 when the power is
turned off with the volume level set to 21 or more.
To change the left/right balance
Press MANU AL SELECT on the remote control. L/R is display ed
for 2 seconds . Press f DOWN or g UP on the remote control
within these 2 seconds.
•The DOLBY PRO LOGIC (page 18) front speak ers lev el is also
changed.

BBE SYSTEM

The BBE system enhances the clarity of high-frequency sound.
It also enriches the Karaoke function to make your voice sound
clear and pleasant.
Press BBE.
Each time it is pressed, the level changes. Select one of the
three levels, or the off position to suit your preference.

SUPER T -BASS SYSTEM

The T-BASS system enhances the realism of low-frequency
sound.
Press T -BASS.
Each time it is pressed, the level changes. Select one of the
three levels, or the off position to suit your preference.
•When playing back a tape recorded with BBE, it is
recommended that BBE be set to off to avoid distorted high
frequency sound.
• Low frequency sound ma y be distorted when the T-BASS system
is used for a disc or tape in which low frequency sound is
originally emphasized. In this case, cancel the T-BASS system.

GRAPHIC EQUALIZER

This unit provides the f ollowing five diff erent equalization curv es.
ROCK: Powerful sound emphasizing treble and bass
POP: More presence in the vocals and midrange
LATIN: Accented higher frequencies for latin m usic.
CLASSIC: Enriched sound with heavy bass and fine treble.
JAZZ: Accented lower frequencies for jazz-type music
Press GEQ repeatedly , or press GEQ once and turn MUL TI
JOG within 4 seconds, to select one of the equalization
curves.
“GRAPHIC EQUALIZER” appears and the GEQ mode is
displayed cyclically as follows.
ROCK POP JAZZ
CLASSICLATIN
GEQ OFF
(
cancel
)
* The GEQ mode can be displayed in reverse order if MULTI
JOG is used.
To display the current GEQ mode
Press GEQ. The current mode is displayed for 4 seconds.
To cancel the selected mode
Press GEQ repeatedly, or press GEQ once and turn MULTI JOG
within 4 seconds, to select “GEQ OFF”.
“GRAPHIC EQUALIZER” disappears.
To select with the remote control
Press GEQ repeatedly. The GEQ mode is display ed cyclically as
above.

SOUND

Using the headphones
Connect headphones to the PHONES jack with a standard stereo
plug (ø6.3 mm, 1/4 inch).
No sound is output from the speakers while the headphones are
plugged in.
Sound adjustment during recording
The output volume and tone (except BBE) of the speakers or
headphones are freely varied without affecting the recording.

SOUND PREPARATIONS