En
ENGLISH
13
CD PLAYING

RANDOM /REPEAT PLAY

Use the remote control.
RANDOM play
All the tracks on the selected disc or all the discs can be played
randomly.
REPEAT play
A single disc or all the discs can be played repeatedly.
Press RANDOM/REPEAT.
Each time it is pressed, the function can be selected cyclically.
RANDOM play RANDOM lights up on the display.
REPEAT play " lights up on the display.
RANDOM/REPEAT play RANDOM and " light up on the
display.
Cancel RANDOM and " disappear from the display.
To play all discs, press c to start play.
To play a single disc, press one of DISC DIRECT PLAY 1-3 to
star t play.
During random play it is not possible to skip to the previously
played track with f.

BLANK SKIP PLAY

The silent portions between tracks recorded on a CD can be
skipped during playback.
1

Press CD BLANK SKIP.

CD BLANK SKIP ON is displayed and a small dot will appear
in the display.
2

Press c to start playback.

The silent portions between tracks will be skipped, and the
sound will be pla yed back without interruption. If a trac k fades
out (ends with the sound gradually decreasing), the fadeout
por tion also will be skipped.
To return to normal playback
Press CD BLANK SKIP again, and the dot in the display will
disappear.
There may be a case where BLANK SKIP PLAY does not
function correctly.
BLANK SKIP PLAY is automatically canceled when perf orming
AI EDIT RECORDING (page 16), PROGRAMMED EDIT
RECORDING (page 17), or recording during PROGRAMMED
PLAY (page 13) or RANDOM PLAY (page 13).

PROGRAMMED PLAY

Up to 30 tracks can be programmed from any of the inserted
discs.
Use the remote control.
1

Press PRGM twice in stop mode.

PRG is displayed .
When the PRGM is pressed once in step 1, the unit enters
the KARAOKE PROGRAM (page 21).
2

Press DISC DIRECT PLAY, then press numbered

buttons 1-3 within 3 seconds to select a disc.

Go to the next step when the tray stops rotating.
3

Press numbered b uttons 0-9 and +10 to program

a track.

Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +10 and 0.
4

Repeat steps 2 and 3 to program other tracks.

5
Press c to start play.
To check the program
Each time f or g is pressed in stop mode, a disc number,
track number, and program number will be displayed.
To clear the program
Press s CLEAR in stop mode.
To add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed
after the last track.
To change the programmed tracks
Clear the program and repeat all the steps again.
To play the programmed tracks repeatedly
After programming the tracks, press RANDOM/REPEAT
repeatedly until " appears on the display.
During programmed play, you cannot perform random play,
check the remaining time, and select a disc or track. Cant
USE is displayed if you attempt to select a track.
•“FULL is displayed if you attempt to program more than 30
tracks.
Small dot
Selected track number Total number of
selected tracks
Program number Total playing time of
the selected tracks