En
ENGLISH
11

TAPE PLAYBACK RADIO RECEPTION

TAPE PLAYBACK

BASIC OPERATIONS

This unit is designed for optimal playback of Type I

(normal) tapes.

1

Press TAPE and press z PUSH EJECT to open

the cassette holder.

Insert a tape with the exposed side down. Push the cassette
holder to close.
2
Press c to start play.
Only the side facing out from the unit can be played back.

To select a playing deck

When tapes are loaded in both dec ks, press TAPE first to select
a deck.
The selected deck number is displayed.
To stop pla y, press s.
To pause play (deck 2 only), press a. To resume play, press
again.
T o fast f orward or re wind, press f or g. Then press s to
stop the tape.

To start play when the po wer is off (Direct Play Function)

Press TAPE. The power is turned on and play of the inserted
tape begins.

To set the tape counter to 0000

Press s CLEAR in stop mode.
The counter is also set to 0000 when the cassette holder is
opened.

When tapes are loaded in both decks

After pla yback on deck 1 finishes , the tape in the deck 2 will start
to play without interruption and will stop at the end of the tape.
(Continuous play)
Type II (High position) tapes can also be play ed back in this unit.
When playing back a Type II tape, turn MULTI JOG to display
“SOFT” in the display. This will set the optimum playback sound
f or Type II tapes. However, “SOFT” playback will be canceled if
any graphic equalizer is selected (page 9), the unit is switched
to a diff erent audio source , the cassette holder is open, or when
the power is turned off.
Selected deck number
Tape counter