En
ENGLISH
25

CONNECTING OPTIONAL EQUIPMENT

Refer to the operating instructions of the connected equipment
for details.
•The connecting cords are not supplied. Obtain the necessar y
connecting cords.
•Consult your local Aiwa dealer for optional equipment.

VIDEO/AUX JACKS

This unit can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
(tur ntables, LD players, MD players, VCRs, TV, etc.).
Connect the red plug to the VIDEO/AUX R jack, and the white
plug to the VIDEO/AUX L jack.
When connecting a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier .

CD DIGITAL OUT (OPTICAL) JACK

This unit can output CD digital sound signals through this jack.
Use an optical cable to connect digital audio equipment (DAT
deck, MD recorder, etc.).
Remov e the dust cap a from the CD DIGITAL OUT (OPTICAL)
jack. Then, connect an optical cable plug to the CD DIGITAL
OUT (OPTICAL) jack.
When the CD DIGITAL OUT (OPTICAL) jack is not being
used
Attach the supplied dust cap.

SUB WOOFER JA CK

Connect an optional powered sub woofer with built-in-amplifier
to the jack.

LISTENING TO EXTERNAL SOURCES

To play equipment connected to the VIDEO/AUX jacks proceed
as follows.
1

Press VIDEO/AUX.

“VIDEO” appears on the display.
2

Play the connected equipment.

To change a source name in the display
When VIDEO/AUX is pressed, “VIDEO” is displayed initially. It
can be changed to “VIDEO”, “AUX” or “TV”.
With the power on, press POWER while pressing VIDEO/AUX.
Repeat the procedure to select one of the names.
To adjust the sound level of the external source
When the sound level of the exter nal source is much higher or
much lower than that of other function sources, adjust it as follo ws.
1Press VIDEO/AUX and play the equipment.
2Press f or g so that the sound le vel becomes the same
as that of other function sources.
During recording, the sound level can not be adjusted.

OTHER CONNECTIONS

OTHER CONNECTIONS OTHER FEATURES