En
ENGLISH
7

BEFORE OPERATION

To turn the power on
Press one of the function b uttons (TAPE, TUNER, VIDEO/AUX,
CD). Playback of the inserted disc or tape begins, or the pre viously
tuned station is received (Direct Play Function).
POWER is also available.
When the power is tur ned on, the disc compar tment may open
and close to reset the unit.
To turn the power off
Press POWER.

DEMO(Demonstration)

When the AC cord is plugged into an AC outlet for the first time
after purchase, the DEMO will begin in the display. When the
power is turned on, the DEMO will end. When the power is turned
off, the DEMO will begin again.
When the clock is set, the DEMO will not begin e v en if the power
is turned off.
To deactivate or activate DEMO
Press CLOCK, and clock is displayed in place of the DEMO.
Press c to activate.
( For more about the DEMO, see page 24 )

SETTING POWER ECONOMIZING MODE

When you set power economizing mode to “ECO ON” or “ECO
AUTO”,the unit reduces power consumption by conducting four
ECO operations as follows.
ECO ON
• The unit (all the illumination of the display and the buttons)
blacks out when the power is turned off. Only the red indicator
lights up.
• If DIMMER (1-3) is selected, the illumination of the displa y and
the buttons brighten for 10 seconds only when you press a
button, or turn VOLUME or MULTI JOG.
• The display dimmer mode is set to the dimmest, the button
illumination lights off , and the v olume is set to the minimum (0)
when the unit turns on by timer recording.
ECO AUTO
• In addition to the three operations of ECO ON, the unit
automatically turns itself off if you do not operate it and the
sound source is mute for 10 minutes.
ECO OFF
The power economizing mode does not function.
1

Press ECO.

“ECO MODE” will be displayed.
2

Press ENTER within 4 seconds.

The current power-economizing mode status will be displayed.
3

Turn MULTI JOG within 4 seconds to select one

of the power-economizing mode.

Example : When “ECO ON” is selected.
4

Press ENTER within 4 seconds.

If the clock is not set, the unit does not black out.
Instead, the DEMO will begin when the power is turned off.

DIMMER MODE

To change the display dimmer mode
1Press ECO repeatedly until “DIM MODE” is displayed.
2Within 4 seconds, press ENTER.
3Within 4 seconds, turn MUL TI JOG to select one of the dimmer
modes changed cyclically as below.
4Within 4 seconds, press ENTER.
DIM-OFF DIMMER 1 DIMMER 2 DIMMER 3
“DIM-OFF” mode is the brightest and “DIMMER 3” mode is the
dimmest. In “DIMMER 3” mode, the spectrum analyzer, the
window of the unit top, and the button illumination light off in
addition.

FLASH WINDOW

The window on the top of the unit lights up or flashes while the
unit is being powered on.
To tur n off the light of the top window, press s while pressing
CD. To turn back on, repeat the above.
PREPARATIONS