12
ENGLISH
CD PLAYING

BASIC OPERATIONS

LOADING DISCS

Press CD, then press z OPEN/CLOSE to open the

disc compartment. Load disc(s) with the label side

up.

To play one or two discs, place the discs on tray 1 and 2.
To play three discs, press DISC CHANGE to rotate the trays
after placing two discs. Place the third disc on tray 3.
Close the disc compartment by pressing z OPEN/CLOSE.

PLAYING DISCS

Load discs.
To play all discs in the disc compartment, press c.
Play begins with the disc on tray 1.
To play one disc only, press DISC DIRECT PLAY 1-3.
The selected disc is played once.
To stop play, press s.
To pause play, press a. To resume play, press again.
To search for a par ticular point during playback, keep f
or g pressed and release it at the desired point.
To skip to the beginning of a track during playback, press
f or g repeatedly or tur n MULTI JOG.
To remove discs, press z OPEN/CLOSE.
To start play when the power is off (Direct Pla y Function)
Press CD. The power is turned on and pla y of the loaded disc(s)
begins.
When z OPEN/CLOSE is pressed, the power is also turned on
and the disc compartment is opened.
To check the remaining time
During play (except random play or programmed play), press
CD EDIT/CHECK. The amount of time remaining until all tracks
finish playing is displayed. To restore the playing time display,
repeat the above.
Selecting a track with the remote control
1Press DISC DIRECT PLAY, then press numbered buttons 1-
3 within 3 seconds to select a disc.
2Press numbered buttons 0-9 and +10 to select a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +10 and 0.
The selected track star ts to play and continues to the end of
that disc.
Replacing discs during play
While one disc is pla ying, the other discs can be replaced without
interrupting play.
1Press DISC CHANGE.
2Remove the discs and replace with other discs.
3Press z OPEN/CLOSE to close the disc compar tment.
When loading an 8-cm (3-inch) disc, put it onto the inner circle
of the tray.
Do not place more than one compact disc on one disc tray.
Do not tilt the unit with discs loaded. Doing so may cause
malfunctions.
Do not use irregular shape CDs (example: heart-shaped,
octagonal ones). It may result in malfunctions.
Tray number of the
disc to be played Total playing time
Number of track being played Elapsed playing time
Total number of tracks