Overview 1 Chapter

PDBK-102 MPEG-TS (Transport Stream) Input/Output Board

Installation of this board enhances the functionality of the standard i.LINK connector, allowing it to be used as an I/O interface for HDV 1) 1080i 2) format compatible TS 3) signals.

HD files recorded on the disc can be converted to TS signals compatible with the HDV1080i format for transfer to HDV devices and HDV editors, and TS signals from HDV devices and HDV editors can be converted to MPEG HD compatible files for recording by this unit.

1)HDV and are trademarks of Sony Corporation and Victor Company of Japan, Limited.

2)HDV1080i: Refers to devices compliant with the “HDV1080i Standard” for recording HD signals on DV tape. There are 1080 effective lines.

3)TS: MPEG-2 transport streams containing MPEG video, MPEG audio, and control information. This is the standard interface for HDV equipment.

PDBK-103 Analog HD Input Board

Installation of this board provides analog HD component input connectors, to enable recoding of analog HD component input signals (RGB and YPbPr, Sync) to discs.

PDBK-104 SD Input Upconverter Board

Installation of this board provides SD input connectors , to allow SD input signals (SDSDI and composite) to be upconverted to HD signals for recording on discs.

Note

This unit cannot record non-standard composite signals, for example the output of VTRs that are not equipped with time base correctors.

10 Features