rAudio monitor channels
This displays the audio monitor channels, as set with MONI CH and MONI SEL on page P1 of the function menu (see page 66).
When you are monitoring channels 1 and 2 (MONI CH is set to “CH 1/2”), the display changes as follows, depending on the setting of MONI SEL.
MONI SEL setting | Display | |
MONO L (monaural L) | 1 | 1 |
|
|
|
MONO R (monaural R) | 2 | 2 |
|
|
|
STEREO | 1 | / 2 |
|
| |
MIX | 1 + 2 | |
|
|
|
1 CH 1 to CH 4 knobs
2 VARIABLE switch
CH 1 | CH 2 | CH 3 | CH 4 | VARIABLE |
|
|
|
| REC |
|
|
|
| PRESET |
|
|
|
| PB |
aCH 1 to CH 4 (audio level) knobs
Depending on the setting of the VARIABLE switch, these adjust the input audio or playback audio levels of CH 1 to CH 4.
bVARIABLE (audio level adjustment selector)
switch
This selects whether the input audio or the playback audio has the levels adjusted by the CH 1 to CH 4 knobs. REC: Adjust the input audio levels. The playback audio
levels are fixed at their preset values.
PRESET: All of the audio levels are fixed at preset values.
PB: Adjust the playback audio levels. The input audio levels are fixed at their preset values.
3Arrow buttonsThe four arrow buttons are also used as the MARK1 button, MARK2 button, IN button, and OUT button, as follows.
Mbutton: MARK1 button m button: MARK2 button < button: IN button , button: OUT button
You can use these buttons for menu setting operations, thumbnail selection, setting or deleting In/Out points, and so on.
1</IN button and ,/OUT button
| MARK1 |
|
IN |
| OUT |
|
| 2 M/MARK1 button and m/MARK2 button |
| MARK2 | 3 IN indicator and OUT indicator |
|
|
a</IN button and ,/OUT button
When the setup or disc menu is visible, use these buttons to change menu settings. When the THUMBNAIL button is lit, you can use these for thumbnail selection.
An In or Out point is set when you press the SET button with the </IN or ,/OUT button held down. The In or Out point setting is deleted when you press the RESET button with the </IN or ,/OUT button held down.
bM/MARK1 button and m/MARK2 button
When the setup or disc menu is visible, use these buttons to change menu settings. When the THUMBNAIL button is lit, you can use these for thumbnail selection.
During recording and playback, the M/MARK1 or m/ MARK2 button can be pressed with the SET button held down to record a SHOT MARK1 or SHOT MARK2 as an essence mark.
To delete or change essence marks, use the supplied PDZ- 1 Proxy Browsing Software.
cIN indicator and OUT indicator
IN indicator: This lights when an In point exists. It flashes if an attempt is made to set an In point after a recorded Out point.
OUT indicator: This lights when an Out point exists. It flashes if an attempt is made to set an Out point before a recorded In point.
44Jog/shuttle transport indicators
VAR
1VAR button
JOG
2JOG button
SHUTTLE
3 SHUTTLE button
5Jog dial
6Shuttle dial
Overview 1 Chapter
Names and Functions of Parts 15