Menus 6 Chapter

To return all settings to their factory default settings

1 Display the setup menu.

2 Press the RESET button.

A message appears, to confirm whether or not you wish to return all settings to their factory default settings.

Monitor screen

Initialize all items to factory

message

preset values?

Message in the time

Init setup?

data display

 

 

 

3 Press the SET button.

The message “NOW SAVING...” appears on the monitor screen, and “Saving...” appears in the time data display, while the settings of all items are returned to their factory default settings. These factory default settings are saved in memory.

Note

If you power off the unit while settings are being saved, settings may not be correctly returned to their factory default settings. Wait until the saving is completed before powering off the unit.

To abandon the resetting operation

Instead of pressing the SET button, press the RESET button.

The display returns to the top level of setup menu, leaving the settings unchanged.

Disc Menu

Use the disc menu to delete data on discs and to format discs.

For the method of displaying the disc menu, see “Displaying the Setup and Disc Menus” (page 67).

DISC MENU

STATUS

DELETE

FORMAT

The disc menu contains the following items. Characters and symbols inside the brackets [ ] appear in the time data display section.

STATUS [Status]

Displays disc or clip status.

DISC [> Disc]: Displays the DISC STATUS screen.

CLIP [> Clip]: Displays the CLIP STATUS screen.

Note

The PDZ-1 Proxy Browsing Software allows you to write TITLE1 and TITLE 2 to the disc, but only TITLE1 appears here.

DELETE [Delete] Deletes clips from the disc.

LAST CLIP [> Last Clip]: Deletes the most recently recorded clip.

ALL CLIP [> All Clip]: Delete all clips. (Clips in the General directory are not deleted.)

FORMAT [Format]

Formats a disc.

QUICK FORMAT [>Quick Format]: Deletes all data on the disc, including the contents of the General directory.

Disc Menu Operations

To display the status of the current disc or clip

Insert a disc, and then proceed as follows.

1 Display the disc menu (see page 67).

2 Press the M/MARK1 button or m/MARK2 button to select STATUS.

3 Press the ,/OUT button.

4 Select DISC or CLIP and press the ,/OUT button.

If you selected DISC, the status of the loaded disc appears.

 

DISC STATUS

USER ID:

 

 

TITLE :

 

 

REMAIN

:

029 min

REWRITE

:

0002 times

SALVAGE

:

OK

FILE SYSTEM

:

OK

 

TO MENU :

MENU KEY

 

 

 

74 System Menu