Selection Scene 4 Chapter
The CLIP MENU appears after the trim is executed. If you press the SHIFT + SET buttons instead of the SET button, you return to the state after step 4 in “Basic Operations”, allowing you execute another trim.
6 Save the current clip list to disc.
For details, see “Saving the Current Clip List to Disc” (page 57).
Deleting Sub Clips
Proceed as follows.
1 Carry out steps 1 to 5 of the procedure in “Basic Operations” (see page 54) (select DELETE in step 2).
To display the total duration of the current clip list after the addition of the selected clips
When you press the SHIFT button, the total duration of the selected clips is displayed, along with the total duration of the clip list after the deletion of the selected clips. This allows you to check the new total duration before making the deletion.
2 Press the SET button.
The deletion confirmation screen appears.
To return to the clip list window without deleting any sub clip
Press the RESET button.
3 Use the </IN or ,/OUT button to select “OK”, and then press the SET button.
The CLIP MENU appears after the deletion is executed.
If you press the SHIFT + SET buttons instead of the SET button, you return to the state after step 4 in “Basic Operations”, allowing you to execute another deletion.
4 Save the current clip list to disc.
For details, see “Saving the Current Clip List to Disc” (page 57).
Setting the Start Timecode for the Current Clip List
Continuous timecode is used in clip lists, regardless of the timecode of the parent clips of sub clips. Therefore, you can set the start timecode for each clip list.
By default, the start timecode (LTC) for the current clip list is set to “00:00:00:00”.
To set this to a different value, proceed as follows.
1 Carry out steps 1 to 4 of the procedure in “Basic Operations” (see page 54) (select TC PRESET in step 2).
The timecode setting screen appears.
The timecode shown in this screen is the current initial timecode of the current clip list. If a clip list has been loaded from disc, and timecode has already been set for that clip list, then that value is displayed.
2 Use the </IN and ,/OUT buttons to select the digit (HOUR, MIN, SEC or FRAME) you want to set.
3 Use the M/MARK1 and m/MARK2 buttons or jog dial to display the value you want to set.
To cancel the timecode setting
Press the RESET button.
4 When you have finished setting all the digits you want, press the SET button.
The starting timecode for the current clip list is set to the specified LTC value. The count starts from that value when playback starts.
5 Save the current clip list to disc.
For details, see “Saving the Current Clip List to Disc” (page 57).
The
•Adding the first sub clip
•Setting the start timecode
Previewing the Edited Clip List
With the SUB CLIP button lit, press the PLAY button. If you are in the thumbnail screen (the THUMBNAIL button is lit), playback starts from the beginning of the selected sub clip.
56 Editing Clip Lists