8 Use the arrow buttons or jog dial to select the desired clip.

You can also select clips with the following operations.

Press the PREV or NEXT button: Moves to the previous or next clip.

Press the PREV or NEXT button with the SHIFT button held down: Moves to the first or last clip.

Press the M/MARK1 or m/MARK2 button with the SHIFT button held down: Switches to the previous or next page. Does not switch when there is only one page.

Press the </IN button or ,/OUT button with the SHIFT button held down: Selects continuous multiple clips.

To display the total duration of the current clip list after the addition of the selected clips

When you press the SHIFT button, the total duration of the selected clips is displayed, along with the total duration of the clip list after the addition of the selected clips. This allows you to check the new total duration before making the addition.

9 Press the SET button.

An I-shaped cursor appears in the lower part of the scene selection window.

Press the RESET button to return to the state of step 8.

10Use the arrow buttons or jog dial to move the cursor to the desired position.

You can also move the cursor with the following operations.

Press the PREV or NEXT button: Moves the cursor to the previous or next clip.

Press the PREV or NEXT button with the SHIFT button held down: Moves the cursor to the first or last clip.

Press M/MARK1 or m/MARK2 button with the SHIFT button held down: Switches to the previous or next page.

11With the SHIFT button held down, press the SET button.

All the clips selected in step 8 are added to the current clip list as sub clips and the scene selection window shows thumbnails of registered sub clips.

At the same time, the cursor disappears and you can select a new clip.

Total duration of sub clips in the current clip list

Cursor (shows insertion position of next sub clip)

Thumbnails of the sub clips already added to the current clip list

12Repeat steps 8 to 11 until you have added all of the

desired clips to the current clip list.

 

 

You can add the same clip as a sub clip any number of

 

 

 

4Chapter

times.

 

13When you have finished selecting all the clips you

Scene

want, press the SET button without pressing the

 

SHIFT button.

Selection

This closes the scene selection window, and the screen

 

returns to the CLIP menu.

 

To close the CLIP menu

 

Press the RESET button.

 

14Save the current clip list to disc.

 

See “Saving the Current Clip List to Disc” (page 57).

Notes

•Unless the current clip list has been saved to disc, its contents will be lost when the unit is powered off or the disc is ejected. After creating a clip list, be sure to save it. An asterisk (*) appears after the date and time of creation when a clip list has not been saved to disc.

Creating Clip Lists 51