Assigning Clip Titles

When the setup menu item OPERATIONAL FUNCTION >CLIP TITLE >AUTO TITLE (see page 68) is set to “ENABLE”, titles are displayed instead of clip numbers for all clips recorded after the setting is made.

Clip title

Titles are made up of a prefix of up to 10 characters and a 5-digit number. The factory default prefix is “TITLE”, and the initial value of the number is 00001. Therefore, the title of the first clip created with the “ENABLE” setting is “TITLE00001”. The number is incremented for each subsequent clip.

See “System Menu” (page 67) in Chapter 6 for more information about the setup menu.

To switch to clip number display

Set CLIP TITLE >AUTO TITLE to “DISABLE”.

Clip numbers are displayed for all clips recorded after the setting is made.

Notes

•Titles are displayed instead of clip numbers for clips that have titles.

•Use the CLIP STATUS screen of the disc menu (see page 74) if you want to check the clip number of a clip that has a title.

To assign clip titles

You can set the clip title prefix and the initial clip title number to arbitrary values.

For example, if you set the prefix to “SCENE” and the initial number to 00100, the next clip to be created will have the title “SCENE-00100”.

1 Select OPERATIONAL FUNCTION >CLIP TITLE >TITLE in the setup menu, and then press the ,/ OUT button.

The CLIP AUTO TITLING screen appears.

CLIP AUTO TITLING

PREFIX

_

TITLE

NUMERIC

_

00001

SHIFT: ( )( )( )( )KEY

INC/DEC: JOG DIAL

TO MENU: MENU KEY

PREFIX: Prefix (up to 5 alphanumeric characters and symbols)

NUMERIC: Initial value of the number (00001 to 99999)

2 Enter the prefix and initial number.

To select the item to set and the character to set (it flashes): Use the arrow buttons.

To select a character to enter at the selected position: Turn the jog dial.

To return the settings to the factory defaults: Press

the RESET button.

3 When you are finished entering the prefix and initial number, press the SET button.

The message “NOW SAVING...” appears, the title is saved, and the menu disappears from the screen.

To clear the menu from the screen without saving a title

Press the MENU button twice.

Note

If you return the initial number to the default value after creating several clips, and then continue recording, clips with the same titles may be created.

Assigning User-Defined Clip and Clip List Names

The following standard format names are assigned automatically to clips and clip lists that are created or recorded by XDCAM devices.

Clips: C0001 to C0300

Clip lists: E0001E01 to E0099E01

You can use the supplied PDZ-1 Proxy Browsing Software to assign user-defined names instead of the standard format names. You can assigned user-defined names instead of the standard format names. Assigning meaningful names to clips and clip lists can facilitate file management.

You can also use this unit's “AUTO TITLING” function to assign user-defined names to clips.

Selection Scene 4 Chapter

Overview 47