Meaning | |
Pressing the ,/OUT button | |
the right of a menu item | switches to the next lower |
See step 1 of the foregoing | menu level or to a setting |
operating procedure (see | selection screen. |
| |
|
|
Pressing the </IN button | |
the left of a menu item | returns to the previous (higher) |
See step 2 of the foregoing | menu level. |
operating procedure (see |
|
| |
|
|
Character string at the | Current setting of the menu |
right of a menu item | item |
| When shown with a colon (:): |
| the current setting is the |
| same as the factory default |
| setting. |
| See step 2 of the foregoing |
| operating procedure (see |
| |
| When shown with a raised |
| dot (·): the current setting |
| is different from the factory |
| default setting. |
| See the next item, |
| |
| |
|
|
An * (asterisk) in a | Factory default setting |
complete list of settings |
|
See step 4 of the foregoing |
|
operating procedure (see |
|
| |
|
|
SETUP MENU
OPERATIONAL FUNCTION
DISPLAY CONTROL
TIME CODE
DISC PROTECTION
VIDEO CONTROL
AUDIO CONTROL
INTERFACE SELECT
METADATA
SETUP BANK OPERATION
|
|
|
|
MENU GRADE | ENHAN |
| |
|
|
|
|
|
| setting | |
| Current | ||
To change the settings of enhanced items, first carry out the procedure in the previous section “Displaying enhanced items” then proceed as follows.
1 In the setup menu screen, repeat steps 2 to 7 of “Changing the Settings of Basic Items”, and then use the </IN, ,/OUT, M/MARK1, m/MARK2 buttons to select a menu item and change the setting.
2 When you have completed the settings, press the SET button.
The message “NOW SAVING...” appears on the monitor screen, and “Saving...” appears in the time counter display, while the new settings are saved in memory.
When the saving operation is completed, the monitor screen and time data display section return to their normal indications.
Menus 6 Chapter
The factory default setting is not to display enhanced items.
To display enhanced items, set the menu item MENU GRADE to “ENHANCED”, following the procedure in the previous section “Changing the settings of basic items”. In step 1, first select “MENU GRADE”, and next select “ENHANCED”, then press the SET button to save the setting in memory.
With this done, when you press the MENU button and the ,/OUT button to display the setup menu, all basic and enhanced items on menu level 1 appear.
After making menu setting changes, to return settings to their factory default settings (setting initialization), use the following procedure.
To return a particular setting to its factory default setting
In the section “Changing the settings of basic items” (page 71), carry out the procedure up to step 5, then with the current setting displayed (in the example, if the factory default setting has been changed, the current setting will be TC MODE), proceed as follows.
1 Press the RESET button.
“OFF” (factory default setting) is selected.
2 Press the SET button.
The setting returned to its factory default is saved in memory as the current setting.
System Menu 73