2-2 Rear Panel

 

1

2Chapter

2

3

 

and Names

 

ofFunctions

DC IN

Parts

S400

 

-AC IN

6

5

4

aDC power inlet connector When the optional BKP-L551 battery adaptor is fitted, connect the DC power cord of the battery adaptor to this connector.

For details, see “To attach a battery pack” (page 33).

bSecurity slot

You can fit a commercially available security cable into this slot.

For information about how to use your security cable, refer to the instructions provided with the security cable.

cCarrying handle Use this to carry the unit.

dAC power switch

Press ~ to power on; press 1 to power off.

eAC power inlet connector Connect to AC power with a power cord (not supplied, see page 58).

fS400 (i.LINK) connector (6-pin, complying with IEEE1394)

AV/C (Audio/Video Control) connection

(see page 30): Inputs and outputs a DVCAM format digital video/audio signal.

FAM (file access mode) connection (see

page 31): Transfers files to and from computers.

Notes

•If video or audio signals from a computer

connected with the S400 (i.LINK) connector are not output, disconnect the

i.LINK cable and connect it again, pushing it straight in.

•When connecting the PDW-D1 to a computer with a 6-pin i.LINK connector, connect to the 6-pin i.LINK connector of the computer first.

28 2-2 Rear Panel