Switch settings

Before beginning playback, make the following switch settings.

~/1 (on/standby) switch (page 27): ~

position

Settings

In the PC operation settings dialog box of the utility software (see page 48), set the following items.

Login: “Inhibit” (Disables FAM connection.)

In the setup menu of the utility software (see page 50), set the following items as required.

PREROLL TIME: Set the preroll time. (0 to 30 seconds)

DV AUDIO OUTPUT SELECT: Select the audio signals to assign audio output channels.

•CH1/CH2 (TR-1/TR-2, TR-3/TR-4, TR-5/TR-6, TR-7/TR-8)

•CH3/CH4 (TR-1/TR-2, TR-3/TR-4, TR-5/TR-6, TR-7/TR-8)

DV OUT AUDIO MODE: Select the audio mode for audio output. (4ch

(32 kHz/12 bit)/ 2ch (48 kHz/16 bit)) 525/625 SYSTEM SELECT: Select the

line mode. (525/625)

STORED OWNERSHIP: Set UMID ownership information (country code, organization code and user code)

Notes

•When playing back a disc recorded in MPEG IMX format, data is output after being converted into DVCAM format.

•This unit does not support clip list playback and saving the playback position.

Inserting a disc

Insert a disc into this unit (see page 36).

For details of playback operations, refer to the manual provided with the editing software to be used.

Preparations 3 Chapter

3-6 Preparations for Recording and Playback

39