|
|
|
|
| for Recording and |
|
| Playback |
|
|
|
|
|
|
|
| Recording |
| ||
| ||
| ||
| ||
|
| |
|
| |
|
| |
| ||
| ||
| ||
3Chapter |
| |
| information about connections. | |
|
| |
Preparations |
| Switch settings |
| Before beginning recording, make the | |
|
|
following switch settings.
~/1 (on/standby) switch (page 27): ~ position
Settings
In the PC operation settings dialog box of the utility software (see page 48), set the following items.
Login: “Inhibit” (Disables FAM connection.)
In the setup menu of the utility software (see page 50), set the following items.
RECORDING FORMAT: DVCAM
Set the following items as required. PREROLL TIME: Set the preroll time.
(0 to 30 seconds)
TC MODE: Select the time code recording mode.
DF MODE: Select the run mode of the internal time code generator in 525- line mode. (DF/NDF)
VITC: Specify whether or not to record the VITC generated by the internal time code generator. (OFF/ON)
DV AUDIO OUTPUT SELECT: Select the audio signals to assign audio output channels.
•CH1/CH2
•CH3/CH4
DV OUT AUDIO MODE: Select the audio mode for audio output. (4ch
(32 kHz/12 bit)/ 2ch (48 kHz/16 bit)) 525/625 SYSTEM SELECT: Select the
line mode. (525/625)
STORED OWNERSHIP: Set UMID ownership information (country code, organization code and user code)
Inserting a disc
Insert a disc into this unit (see page 36).
Note
If the ERROR/ALARM indicator flashes once a second when you attempt to record, check the problem in the following table.
Cause | Action |
A disc recorded in | Replace with a disc |
MPEG IMX | not recorded in |
format has been | MPEG IMX format, |
inserted. | or reformat the disc |
| |
|
|
You can check the details of alarms, using the alarm log of the utility software (see page 50).
For details of recording operations, refer to the manual provided with the editing software to be used.
3-6-2 Preparations for Playback
See
38