3

In the confirmation message box, click

 

the OK button.

 

4

Exit the utility software (see page 46).

5

Do one of the following on the

or

 

icon displayed in the remote

 

 

computer’s taskbar.

 

•Double click.

•Right click, and select one of the following commands from the menu which appears.

-Windows 2000: Unplug or eject hardware

-Windows XP: Safely Remove Hardware

•Windows 2000: The Unplug or Eject Hardware dialog appears.

•Windows XP: The Safely Remove Hardware dialog appears.

6 Select “Sony XDCAM PDW-D1 IEEE

1394 SBP2 Device” and click Stop.

The Stop a Hardware device dialog appears.

7 Select “Sony XDCAM PDW-D1 IEEE

1394 SBP2 Device” and click OK.

•Windows 2000: A confirmation message appears.

•Windows XP: “Sony XDCAM PDW-D1 IEEE 1394 SBP2 Device” is deleted from the Hardware devices list.

8 Power the unit off, and then power it on again.

The line mode selected in step 1 becomes available for use.

Owner setting

When using an extended UMID, set the following owner information.

Item name

Settings

Country code

An abbreviated

 

alphanumeric string (up

 

to four bytes

 

alphanumeric strings)

 

according to the values

 

defined in ISO 3166-1.

 

 

Organization

A code registered with

code

the SMPTE registration

 

office (up to four bytes

 

alphanumeric strings)

 

 

User code

A code for user

 

identification (up to four

 

bytes alphanumeric

 

strings)

 

 

Country code

You can find your own country code on the following web page.

Refer to ISO 3166-1: http://www.evertype.com/standards/ iso3166/iso3166-1-en.html

Organization code

•Organization codes must be acquired by applying to the SMPTE registration office.

•When no organization code has been acquired, it is forbidden to enter an arbitrary string. As a rule, the code “00” must be entered. Freelance operators who

do not belong to an origination should enter “~.”

•There are no problems in recording or playing back audio-video signals, if an organization code is not set.

User code

•The user code is registered with each organization locally. It is usually not centrally registered.

•This user code is determined by the organization. The methods used depend on the organization.

•User code cannot be entered when no organization code has been entered.

Software Utility the Using 5 Chapter

5-3 Details of Functions

53