Software Utility the Using 5 Chapter

AUDIO CONTROL

Item name

Settings

IMX DATA

When “IMX50,”

LENGTH

“IMX40,” or “IMX30” is

 

selected in setup

 

menu item

 

“RECORDING

 

FORMAT,” select the

 

audio quantization bit

 

count and number of

 

recording channels.

 

16bit × 8ch: 16 bits ×

 

8 channels

 

24bit × 4ch: 24 bits ×

 

4 channels

Note

When “RECORDING FORMAT” is set to “DVCAM,” the setting is automatically fixed at 16 bits ⋅ 4 channels.

Recording format setting

Item name

Settings

RECORDING

Select the recording

FORMAT

format.

 

IMX50: MPEG IMX 50

 

IMX40: MPEG IMX 40

 

IMX30: MPEG IMX 30

 

DVCAM: DVCAM

 

 

Line mode setting

 

 

Item name

Settings

525/625

Switch between 525-

SYSTEM

line and 625-line

SELECT

modes.

 

525: 525-line mode

 

(NTSC)

 

625: 625-line mode

 

(PAL)

 

 

Indication that a setting is at the factory default value

When a setting is at the factory default value, a colon (‘:’) appears between the item name and the setting value.

When the setting has been changed, this changes to a dot (‘.’).

Example: PREROLL TIME : 5 SEC (setting is factory default) PREROLL TIME . 8 SEC (setting has been changed)

AV setting operations

To move from one menu item to another: Use the V/v buttons, or the up and

down arrow keys on the keyboard.

To move from one menu level to another: Use the B/b buttons, or the left and right arrow keys on the keyboard.

To change the setting value: With the cursor on the setting value, use the V/v buttons, or the up and down arrow keys on the keyboard. (Factory default settings are shown with an asterisk

(*).)

To return a setting to its factory default value: In the setting value selection

screen, click the Reset button.

To return all settings to their factory default values: In the menu item selection screen, click the Reset button.

To save the changed settings: Click the

Set button.

To discard the changed settings: Click the Cancel button, or press the Esc key on the keyboard.

To change the line mode setting

1 Refer to “AV setting operations” (previous item), and change the line mode setting.

2 Press the Set button.

If a disc is present, it is automatically ejected.

52 5-3 Details of Functions