![](/images/backgrounds/209048/209048-189145x1.png)
3 Turn the MENU knob to select the desired aspect ratio (16:9/4:3), and press the MENU knob.
Setting the aspect ratio in HD modeYou can select the aspect ratio of video downconverted from HD for output as SD.
3 Turn the MENU knob to select the desired aspect ratio (16:9/4:3), and press the MENU knob.
Note
The aspect ratio of
(How to select an item in the menu screen: Turn the MENU knob to move the b mark to the desired item.)
1 Display the OUTPUT page of the OPERATION menu, and press the MENU knob.
2 Select HDtSD, and press the MENU knob.
When the recording format is DVCAM and the aspect ratio is 16:9, you can display the indication “16:9” on the viewfinder screen by setting DISP 16:9 on the VF DISP 1 page of the OPERATION menu to ON.
For details, see “Selecting the Display Items” on page 137.
This unit allows you to record in progressive scan mode as | • 60i (interlace scan) mode | |
well as in interlace scan mode. You can select the scan | • | 30P (progressive scan) mode |
mode from the following modes using the FORMAT page | • | 23.98P mode |
of the OPERATION menu. |
|
|
DVCAM video signals recorded in 23.98P mode are
.
DF/NDF | Purpose | Notes | |
DF | Obtain an effect similar | – |
|
| to that obtained by |
|
|
| 23.98P shooting while |
|
|
| maintaining interlace |
|
|
| scan mode. |
|
|
|
|
|
|
NDF | • | There will be noise on the recorded image if you change the operating mode for the | |
| with nonlinear editing |
| internal timecode generator using the |
| software (NLE). |
| panel while recording. |
| (Select according to | • | The video and audio signal and timecode output via i.LINK may not be consecutive |
| your NLE.) | ||
|
| when recording starts. | |
|
|
| |
|
| Notes on | |
|
| • | When the PRESET/REGEN/CLOCK switch on the side control panel is set to CLOCK, |
|
|
| this unit operates in DF mode. The synchronization of the timecode and the pulled- |
|
|
| down picture is disabled. |
|
| • | When |
|
|
| mode and synchronization of the |
|
|
| This setting will continue in effect until the timecode setting |
|
|
| is changed. |
|
|
|
|
Settings Detailed and Displays Menu 5 Chapter
Adjustments and Settings from Menus | 145 |
|
|