Sony PDW-F355L Resetting the Settings of the Camcorder to the Standard Settings, Stick” into the camcorder memory, To load scene files from the “Memory

?P00 SCENE RECALL	ESC
DISPLAY MODE	: F.ID

MEM-1:STANDARD

MEM-2:STANDARD

MEM-3:STANDARD

MEM-4:STANDARD

MEM-5:NO FILE

2Turn the MENU knob until the page which contains the desired file appears.

3Press the MENU knob, then turn the MENU knob to move b to the desired file number, and press the MENU knob.

The message “RECALL OK? YES b NO” appears.

P01	SCENE	RECALL		ESC
RECALL		OK?	YES	NO
DISPLAY MODE			:	ALL
001	.SCENE1
002	.SCENE2
003	.NO FILE
004	.SCENE4
005	.SCENE5
***.5FILE		LOAD		MEM1-5

3 To carry out the recall, select YES and press the MENU knob.

To cancel, press the MENU knob leaving b pointing to NO.

When the loading is completed, the message

6Chapter	“COMPLETE” appears. The camcorder is set up
	according to the loaded scene file. If no file is present
andSaving	with a particular file number, this is shown as “NO
	FILE”.

To load scene files from the “Memory

Loading	Stick” into the camcorder memory
User	You can load up to five scene files stored in the “Memory
	Stick” into the camcorder memory all in a single operation.
Setting
	(How to select an item in the menu screen: Turn the
Data	MENU knob to move the b mark to the desired item.)
	1 Display the SCENE FILE page of the FILE menu, and
	press the MENU knob.
	For details on menu operations, see “Basic Menu
	Operations” on page 132.
	2 Select SCENE RECALL, and press the MENU knob.
	The SCENE RECALL page appears.
	3 Turn the MENU knob until the SCENE RECALL
	page which contains the desired scene files appears,
	and press the MENU knob.

4 Press the MENU knob. Then select 5FILE LOAD B MEM 1-5, and press the MENU knob.

The message “RECALL OK? YES b NO” appears.

P01 SCENE RECALL			ESC
RECALL	OK?	YES	NO
DISPLAY	MODE	:	ALL

001.SCENE1

002.SCENE2

003.NO FILE

004.SCENE4

005.SCENE5

***.5FILE LOAD MEM1-5

5 To carry out the recall, select YES and press the MENU knob.

To cancel, press the MENU knob leaving b pointing to NO.

When loading is complete, the message “COMPLETE” appears and the access indicator goes off.

Notes

•The scene files loaded from the “Memory Stick” overwrite data saved in the camcorder memory.

•To load the scene file saved in the camcorder memory when the “Memory Stick” is inserted, return to the P00 SCENE RECALL page and load the desired scene file in the camcorder memory.

•When there is no file to be loaded (shown as “NO FILE”), an existing file of the same number is unaffected. In the example shown in step 4, MEM(3) is not overwritten.

Resetting the Settings of the Camcorder to the Standard Settings

You can reset the settings of the camcorder to the standard settings.

(How to select an item in the menu screen: Turn the MENU knob to move the b mark to the desired item.)

1 Display the SCENE FILE page of the FILE menu, and press the MENU knob.

For details on menu operations, see “Basic Menu Operations” on page 132.

2 Select STANDARD, and press the MENU knob.

154 Saving and Loading Scene Files