Each press switches the information displayed for clip lists in the following order.

Date and time of creation t Title t Clip list name

tDate and time of creation t ...

3 Select the desired clip list name, and press the button/ knob.

This saves the current clip list to disc.

To apply a desired title or name to a clip list Use the supplied PDZ-1 Proxy Browsing Software.

For details, see the PDZ-1 online help.

Setting the Start Timecode for the Current Clip List

By default, the start timecode (LTC) for the current clip list is set to 00:00:00:00.

To set this to a different value, proceed as follows.

1 Display the CLIP menu.

See “To display the CLIP menu” on page 96.

2 Use the SEL/SET button or MENU knob to align the cursor with “TC PRESET”, and press the button or knob.

The display appears as in the following figure.

The timecode shown is the start timecode currently set for the current clip list.

3 Press the SEL/SET button left and right to select the desired time unit (any of HOUR, MIN, SEC, and FRAME).

4 Press the SEL/SET button up or down, or turn the MENU knob to display the desired value.

5 When all time units are set correctly, press the SEL/ SET button or MENU knob.

This sets the start timecode for the current clip list, which will be used for playback.

To cancel the timecode setting, hold down the SHIFT button, and press the SEL/SET button down (CLIP

MENU).

Alternatively, press the RESET button on the right side of the LCD monitor.

6 Save the current clip list.

See “Saving the Current Clip List to Disc” on page 94.

Note

The DF/NDF timecode setting of the current clip list is set to the current setting of the camcorder when one of the following operations is performed.

•When you add the first sub clip

•When you set the start timecode

See page 121 for more information about DF/NDF settings.

Switching the Information Displayed on Thumbnails

You can switch the information displayed at the bottom of thumbnails in the thumbnail screen. You can also select display of sequence numbers.

Proceed as follows.

1 Display the CLIP menu.

See “To display the CLIP menu” on page 96.

2 Select “CLIP INFORMATION”.

A sub menu appears.

3 Use the SEL/SET button or MENU knob to select the information to display from among the following, and then press the button or knob.

DATE: Date of recording

TIME CODE: Start timecode

DURATION: Whole length of clip

SEQUENCE NUMBER: Thumbnail sequence number

The factory default setting is “TIME CODE”.

The display below each thumbnail changes depending on the item selected.

Selection Scene 4 Chapter

Editing Clip Lists 95