![](/images/backgrounds/209048/209048-18972x1.png)
5 When you have finished entering the prefix, turn the MENU knob to move the x mark to END, and then press the MENU knob.
The camcorder exits prefix input mode, and the original CLIP TITLE page appears.
To set the initial value of the clip title serial numberYou can set the initial value of the clip title serial number to 00001 (default) or to any
To return the initial value to 00001
Proceed as follows.
| 1 On the CLIP TITLE page, select “CLEAR | ||||||
3Chapter | |||||||
NUMERIC” and then press the MENU knob. | |||||||
| |||||||
Recording | The message “CLEAR OK? YES b NO” appears. | ||||||
2 Select YES and then press the MENU knob. | |||||||
| |||||||
and | The value in the “NUMERIC” field returns to “00001” | ||||||
(default). |
|
|
|
| |||
Playback |
|
|
|
| |||
To set the initial value to any number | |||||||
| |||||||
| Proceed as follows. |
|
|
| |||
| 1 On the CLIP TITLE page, select “NUMERIC” and | ||||||
| then press the MENU knob. | ||||||
| A digit selection screen appears. | ||||||
|
|
|
|
|
| ||
|
| 005 CLIP TITLE |
|
|
| ||
|
| 0123456789 |
|
|
| ||
|
| INS DEL | RET | ESC | END |
| |
|
| CLEAR | NUMERIC | : | EXEC |
| |
|
| LOAD PREFIX DATA: | EXEC |
| |||
|
| PREFIX |
| : | EXEC |
| |
|
| NUMERIC | : | EXEC |
| ||
|
|
|
|
|
|
|
2 Move the x mark to the digit you want to change and then press the MENU knob.
3 Turn the MENU knob to move the x mark to the desired digit in the list of selectable digits, and then press the MENU knob.
4
5 When you have finished entering the value, turn the MENU knob to move the x mark to END, and then press the MENU knob.
The camcorder exits numeric input mode, and the original CLIP TITLE page appears.
To check the titles of recorded clips
Press the THUMBNAIL button to display the thumbnail screen, and then select the clip whose title you want to check.
The title of the selected clip appears in the upper left of the screen.
See “Cuing up with sub clip thumbnails” (page 82) for more information about the thumbnail screen.
Notes
•It is not possible to specify 00000 as the initial value. Even if you enter 00000, the value is reset to 00001 when the camcorder exits numeric input mode.
•The value of the serial number is incremented by 1 every time a title is generated. When the value reaches 99999, the next number restarts from 00001.
•Duplicate clip titles can be generated if you reset the serial number after recording several clips or the same is true depending on the value setting. Care should be taken when setting the serial number.
AssigningThe following standard format names are assigned automatically to clips and clip lists that are created or recorded by XDCAM devices.
Clips: C0001 to C0300
Clip lists: E0001E01 to E0099E01
You can use the supplied
To assign clip names on this unit
The title assigned to clip becomes its clip name (file name).
C0001.MXF
TITLE00001
When sub item “AUTO NAMING” is set to “C****”
72 Recording – Advanced Operations