3 Use the SEL/SET button (four-way arrow key) or

To cancel the trim

MENU knob to select the desired sub clip, and press

Press the SEL/SET button to the lower side (CLIP

the button or knob.

MENU side).

The first frame of the selected sub clip is displayed. In

8 Save the contents of the current clip list to disc.

this state you can play back or search the entire disc.

 

 

See “Saving the Current Clip List to Disc” on page 94.

Selection Scene 4 Chapter

4 Carry out playback or search, to find the scene to be the new In point or Out point of the selected sub clip.

You can also turn the MENU knob for a jog operation.

5 Use the SEL/SET button or MENU knob to select “IN” or “OUT” on the screen, and press the button or knob.

The set timecode value appears as “IN” or “OUT”.

To reset an In point or Out point

Select “IN” or “OUT” on the screen and then press the RESET button on the right side of the LCD monitor. The In or Out point returns to the value it had before you entered the trim screen.

To cue up the In or Out point

(Do one of the following to cue up the In point.)

•With the SHIFT button held down, press the PREV button.

•With the SEL/SET button pressed to the left, press the PREV or NEXT button.

(Do one of the following to cue up the Out point.)

•With the SHIFT button held down, press the NEXT button.

•With the SEL/SET button pressed to the right, press the PREV or NEXT button.

6 When you are finished setting the In or Out point, select “OK”.

The background of “OK” turns to yellow.

7 Press the SEL/SET button or MENU knob.

The trim is executed.

To continue trimming sub clips

With the SHIFT button held down, press the SEL/SET button or the MENU knob. After the trim is executed, you return to the screen of step 3 instead of the CLIP menu. This allows you to continue trimming.

Deleting Sub Clips

Proceed as follows.

1 Carry out step 1 of the procedure in “Editing Clip Lists” on page 93, to display the CLIP menu.

2 Use the SEL/SET button or MENU knob to select “DELETE”, and press the button or knob.

This switches to the screen for selecting a sub clip to be deleted.

3 Use the SEL/SET button (four-way arrow key) or MENU knob to select the sub clip to be deleted, and press the button or knob. To make a multiple selection, hold down the SHIFT button, and turn the MENU knob.

A confirmation message appears.

4 Select “OK”, and press the button or knob.

This carries out the deletion.

To continue deleting sub clips

With the SHIFT button held down, press the SEL/SET button or the MENU knob. After the deletion is executed, you return to the screen of step 3 instead of the CLIP menu. This allows you to continue deleting.

5 Save the contents of the current clip list to disc.

Saving the Current Clip List to Disc

Proceed as follows.

1 Display the CLIP menu.

See “To display the CLIP menu” on page 96.

2 Use the SEL/SET button or MENU knob to select “SAVE CLIP LIST” with the cursor in the CLIP menu, and press the button or knob.

This displays the list of clip lists.

For a clip list in which no data has been stored, this appears as “NEW FILE”.

To switch the information displayed for clip lists

Press the SEL/SET button to the right side.

94 Editing Clip Lists