Operating a Specific Display With the Remote Commander

Using the supplied Remote Commander, you can operate a specific display without affecting other displays installed at the same time.

1 Press ID MODE ON on the Remote Commander. Monitor index numbers appear in white characters on all the displays. (Every display is allocated an individual preset index number from 1 to 255.)

For details, see “To change the index number” on page 49 (GB).

Index number

I n d e x N u m b e r . 1 1 7 . . .

2 Input the index number of the display you want to operate using the 0 – 9 buttons on the Remote Commander.

The input number appears right next to the index number of each display.

Input Number

I n d e x N u m b e r . 1 1 7 1 1 7

3 Press ID MODE SET.

The characters on the selected display change to green while the others change to red.

You can operate the specified display only. (Power ON/STANDBY apply to the other displays, as well.)

Operating a Specific Display With the Remote Commander

4 When all of the setting changes have been completed, press the ID MODE OFF button. The display returns to the normal screen.

To change the index number

You can change the index number if necessary. When you change the number, use the buttons on the control button section of the display unit.

1 Press MENU.

The main menu appears on the screen.

P i c t u r e / S o u n d C o n t r o l

P i c t u r e M o d e :

 

S t a n d a r d

A d

j

u s

t

P i c t u

r

e

 

A d

j

u s

t

S o u n d

 

 

 

S e l e c t

S e t ENTER /

E n d MENU

2 Press M/m to move the cursor (yellow) to “Remote” and press ENTER.

The Remote menu appears on the screen.

R e m o t e

I n d e x N u m b e r :

1

R e m o t e

M o d e :

O n

R e m o t e

O n l y :

 

S e l e c t

S e t ENTER

E n d MENU

3 Press M/m to move the cursor (yellow) to “Index Number” and press ENTER.

The following menu appears on the screen.

I n d e x N u m b e r :

1

4 Select the index number with M/m and press

ENTER.

The menu returns to the Remote menu.

49 (GB)