Watching the Picture

Watching the Picture

Before you start

•Power on the display.

•Power on the connected equipment and play a video source.

•To display the input signal information and Picture Mode on the screen when turning on the power or switching the input signal, set “Display” in the Custom Setup menu to On.

•To select the language of the menus, see “Selecting the On-screen Language” on page 42 (GB).

Switching the Input Signal

1 Press MENU.

The main menu appears on the screen.

P i c t u r e / S o u n d C o n t r o l

P i c t u r e M o d e :

 

S t a n d a r d

A d

j

u s

t

P i c t u

r

e

 

A d

j

u s

t

S o u n d

 

 

 

S e l e c t

S e t ENTER /

E n d MENU

2 Press M/m to move the cursor (yellow) to “Input Select” and press ENTER or ,.

The Input Select menu appears on the screen.

I n p u t S e l e c t

I N P U T 1

R G B

I N P U T 1

Y U V

I N P U T 2

D V I

 

 

V I D E O C O M P O S I T E

 

 

 

V I D E O

Y / C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S e l e c t

S e t ENTER

E n d MENU

3 Press M/m to move the cursor (yellow) to the input source to be displayed and press ENTER. INPUT1 RGB: Selects the signal (analog RGB)

input to the INPUT1 connectors. INPUT1 YUV: Selects the signal (component)

input to the INPUT1 connectors. INPUT2 DVI * : Selects the signal (digital RGB)

input to the INPUT2 connectors. VIDEO COMPOSITE: Selects the signal input

to the COMPOSITE IN of the VIDEO connectors.

VIDEO Y/C: Selects the signal input to the Y/C IN of the VIDEO connectors.

* When using the PFM-42V1N, you cannot select

this item because this model is not equipped with the INPUT2 connectors.

When a Component/RGB Input Adaptor BKM- V11 or an RGB/Component Active Through Adaptor BKM-V12 is installed

OPTION YUV: Selects the signal (component) input to the YUV/RGB IN connectors.

OPTION RGB: Selects the signal (analog RGB) input to the YUV/RGB IN connectors.

The selected input signal appears on the screen.

Color system or horizontal/vertical frequency

Signal type

O P T I O N R G B

1 0 2 4 7 6 8 / 6 0

S t a n d a r d

Picture mode

You can switch the input signal using the supplied Remote Commander.

Notes

•We recommend input source video equipment equipped with a TBC (time base corrector). If the display receives a signal without TBC, the picture may disappear due to disturbance of the sync signal.

•If signals of the same format are input from multiple systems, the Picture Quality setting will default to the most recently set value (Only when the signal formats are identical).

26 (GB)