Connections

Connections

Before you start

•First make sure that the power to each piece of equipment is turned off.

•Use connecting cables suitable for the equipment to be connected.

•The cable connectors should be fully inserted into the jacks. A loose connection may cause hum and other noise.

•To disconnect the cable, pull it out by grasping the plug. Never pull the cable itself.

•Refer to the instruction manual of the equipment to be connected.

•Insert the plug securely into the AC IN socket.

•Use one of the two AC plug holders (supplied) that will securely hold the AC plug.

Connecting the Speakers

You can enjoy viewing with a greater sense of presence by connecting speakers SS-SP20B (not supplied). Please be sure to connect the speakers correctly. For more details on connecting the speakers, see the operating manual that came with the speakers.

Connecting the AC Power Cord

1 Plug the AC power cord into the AC IN socket. Then, attach the AC plug holder (supplied) to the AC power cord.

AC IN socket

AC power cord

AC plug holder

2 Slide the AC plug holder over the cord until it connects to the AC IN socket cover.

AC IN socket cover

To remove the AC power cord

After squeezing the AC plug holder and freeing it, grasp the plug and pull out the AC power cord.

15 (GB)