Sony Remote Commander RM-971, 3MUTING button, 5INPUT1 button, 6INPUT2 button, qk MENU button, 2STANDBY button, 4DISPLAY button, 7RGB/YUV button, 8S/VIDEO button

Remote Commander RM-971

1
2	MUTING	DISPLAY	STBY	ON
3
4			POWER
5	INPUT 1	INPUT 2	VIDEO	OPTION	qf
6	1	2		3	qg
	4	5		6	qh
	7	8		9
		0
7	RGB/YUV	S/VIDEO		ASPECT	qj
8				MENU
					qk
9		ENTER
0	BRIGHT			CHROMA	ql
qa	H SHIFT	V SHFT	H SIZE	VSIZE	w;
qs	VOL		CONTRAST		wa

qdws

ON SET OFF

wd

ID MODE

PFM

RM-971

1POWER ON switch Press to power on the display.2STANDBY buttonPress to change the display to the standby mode.3MUTING buttonPress to mute the sound. Press again to restore sound.4DISPLAY button

Press to display the input signal information and the picture mode on the screen. Press again to hide them. If this displayed information is left undisturbed for a short time, it will disappear automatically.

5INPUT1 buttonPress to select the signal input to the INPUT1 connectors.6INPUT2 buttonPress to select the signal input to the INPUT2 connectors.

Location and Function of Parts and Controls

7RGB/YUV button

Press to select the format matching that of the input signal connected to the INPUT1 connector. Each press toggles between RGB and component (YUV).

8S/VIDEO button

Press to select the signal input to the VIDEO connectors. Each press toggles between COMPOSITE IN and Y/C IN.

9M/m/</,/ENTER buttons

The M/m/</, buttons move the menu cursor (yellow) and set values, etc. Pressing the ENTER button sets the selected menu or setting items.

q; BRIGHT button

Adjusts the brightness when Picture Mode is set to any of “User1” to “User3.” Press this button, then adjust the brightness with M/m or </, buttons 9.

qa V SHIFT button

Adjusts the vertical centering. Press this button, then adjust the vertical centering with M/m or </, buttons 9.

qs H SHIFT button

Adjusts the horizontal centering. Press this button, then adjust the horizontal centering with M/m or </, buttons 9.

qd VOLUME +/– buttonPress to adjust the volume.qf OPTION button

Selects the signal input to an optional adaptor (except BKM-V10) when you install one in the unit.

qg VIDEO button

Press to select the signal input to the COMPOSITE IN or Y/C IN of the VIDEO connectors.

qh Number buttonsPress to enter index numbers.qj ASPECT buttonPress to change the aspect ratio (Wide Mode).qk MENU button

Press to show menus. Press again to hide them.

To use the MENU button to return to the previous menu level, see “Initial Setup menu” on page 23 (GB).

ql CHROMA button

Adjusts the chroma when the picture mode is set to any of “User1” to “User3.” Press this button and adjust the chroma with the M/m or </, buttons 9.

11 (GB)