Sony “ON.”, Caution, ,buttons, w; H SIZE button, wa V SIZE button, Installing batteries, ws CONTRAST +/– button, wd ID MODE (ON/SET/OFF) buttons

Location and Function of Parts and Controls

w; H SIZE button

Adjusts the horizontal picture size. Press this button, then adjust the horizontal picture size with M/m or </, buttons 9.

wa V SIZE button

Adjusts the vertical picture size. Press this button, then adjust the vertical picture size with M/m or </

,buttons 9.ws CONTRAST +/– buttonAdjusts the contrast when Picture Mode is set to any of “User1” to “User3.”wd ID MODE (ON/SET/OFF) buttons

Press ON to show an index number on the screen. Enter the index number of the display you want to operate with Number buttons qh, then press SET. Press OFF to return to the normal mode.

For details on the index numbers, see “Operating a Specific Display With the Remote Commander” on page 49 (GB).

Installing batteriesInsert two size AA (R6) batteries in correct polarity.

Be sure to install the negative < – end first.

eE

e

E

•In normal operation, batteries will last up to half a year. If the Remote Commander does not operate properly, the batteries might be exhausted sooner. Replace them with new ones.

•To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the Remote Commander for a fairly long time.

Caution

Risk of explosion if batteries are replaced by an incorrect type. Dispose of used batteries according to the instructions.

When the Remote Commander does not work

Check that the STANDBY indicator lights up and the Remote Mode in the Remote menu is not set to Off. The Remote Commander operates the display only when both of the two conditions below are met.

•The display is turned on, or it is in the standby mode.•The Remote Mode in the Remote menu is set to“ON.”

For details on the Remote Mode, see “Remote menu” on page 24 (GB).

12 (GB)