Sync Mode

Sets the mode according to the signal input at pin 13 of the RGB/YUV IN. Signals can be set only to 575/ 50I or 480/60I.

H/Comp: When a horizontal signal or a composite synchronous signal* is inputVideo: When a video signal is input *Depending on the level of the composite

synchronous signal, the image may not be displayed correctly. In that case, change the Sync Mode setting.

Input signal and Synchronous mode settings

PIN

Signal input over the D-sub

Synchronous

mode setting

 

 

13

480/60I, 575/50I Composite Video

Video signal

Composite Sync

Synchronizing

 

 

 

13/14

H Sync/V Sync

signal

2

Sync On Green

 

 

 

 

See “Pin assignment” on page 52 (GB) for more information on the pin assignments of RGB/YUV IN.

Notes

•There are some inputs for which only synchronizing signals can be selected. In this case, an image will not be displayed even if a video signal is input to the 13 pin connector. Input horizontal/vertical synchronization signals through the 13 or 14 pin connectors, or input Sync On Green signals through the RGB connector.

•With Sync On Green, if the unit is not set to accept synchronizing signals, the image will not be displayed.

•Sync Mode settings cannot be carried out using option boards.

•This unit does not support the three value sync format of composite sync and 576/60P.

Using On-screen Menus

Initial Setup menu

You can select the on-screen language and the color system, and set the MENU Function.

 

 

 

I n i t i a l

S e t u p

 

 

 

 

 

 

 

 

E n g l i s h

 

 

 

 

L a n g u a g e :

 

 

 

 

C o l o r

S y s t e m :

 

 

 

 

 

 

P A L 1 0 0 H z :

O n

 

 

 

 

 

MENU F u n c t i o n :

O n

/ O f f

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S e l e c t

S e t ENTER /

E n d MENU

Language

Selects the on-screen language (Japanese, English, German, French, Spanish, or Italian).

For details, see “Selecting the On-screen Language” on page 42 (GB).

Color SystemSelects the input signal.Auto: to display NTSC, PAL, SECAM/NTSC4.43 or NTSC/PAL-M/PAL-N signalsNTSC: to display NTSC signalsNTSC4.43: to display NTSC4.43 signalsPAL: to display PAL signalsSECAM: to display SECAM signalsPAL-M:to display PAL-M signalsPAL-N:to display PAL-N signalsPAL60: to display PAL60 signals

When the Color System is set to “Auto,” an additional color system capable of automatic detection is set in the level below.

•Automatic detection of NTSC/PAL/SECAM/ NTSC4.43•Automatic detection of NTSC/PAL-M/PAL-N

Note

•This can only be set when a video signal is being received.

•You can switch the refresh rate using the “PAL 100Hz” setting when PAL or PAL-N signals are input.

MENU Function

Selects the operation when the menu key is pressed. On/Off: The menu display toggles between on and

off each time the menu key is pressed. Return: The cursor returns to the previous level

each time the menu key is pressed.

23 (GB)