Using i.LINK

Using the i.LINK Control Panel

After you select an i.LINK device using the Device List, the SXRD projection TV displays the i.LINK Control Panel, which allows you to use the SXRD projection TV's remote to control the selected i.LINK device.

1 If the i.LINK Control Panel is not already displayed, press i.LINK on the remote control.

✍If i.LINK is pressed while the SXRD projection TV is displaying an analog

or digital channel (not the i.LINK device), then the Device List will

appear. Select the desired device from the list and press to display the Control Panel.

2 Press V v B b on the remote control to navigate through the options available in the i.LINK Control Panel.

3 Press to select a desired option.

4 Press EXIT to exit the Control Panel and view the i.LINK device full- screen.

✍To exit i.LINK mode, select DTV from the Device List or press CH+/–.

LINK.i Using

i.LINK Control Panel

52.3

The DTV window appears only if the i.LINK menus were entered while watching a digital TV channel

Back to Device List

Power

 

Setup

Swap Audio

 

Exit i.LINK

Full Screen

VICTOR HM-DH35000

Status: Playing.

00:00:31

The i.LINK Control Panel displays the signal from the SXRD projection TV to the left on screen (if available), and the signal from the currently selected device to the right on screen.

(Continued)

103