Setting Up the SXRD Projection TV
Camcorder | Disconnect all power sources before making any connections. |
| For easy connection of the camcorder, the SXRD projection TV has front |
| audio and video inputs (shown below). However, if you prefer, you can also |
| connect the camcorder to the SXRD projection TV’s rear AUDIO and S |
| VIDEO IN jacks. |
| Using A/V and S VIDEO cables, connect the camcorder’s audio and |
| S VIDEO OUT jacks to the SXRD projection TV’s AUDIO and S VIDEO |
| IN jacks. |
|
|
| ✍ If your camcorder is equipped with an i.LINK jack, you can connect it |
| using i.LINK instead of the A/V inputs. See “Using i.LINK” on page 99. |
| ✍ If you have a mono camcorder, connect its left audio output to the SXRD |
| projection TV’s AUDIO L (MONO) jack. |
| ✍ If your camcorder is not equipped with S VIDEO, use a VIDEO cable |
| (yellow) instead of the S VIDEO cable. |
|
|
Cables are often
Connect red to red, white to white, etc.
Front of SXRD projection TV
i.LINK S400
VIDEO 2 INPUT
TS/DV/MICROMV/HDV | S | VIDEO L | - | ||
|
|
|
|
|
|
To A/V output
A/V cable
Camcorder
To S VIDEO output
VIDEO
S VIDEO
S VIDEO cable
50