Setting Up the SXRD Projection TV
Satellite Receiver with a VCR and Cable
Disconnect all power sources before making any connections.
1 Connect the CATV cable to the single (input) jack of the splitter.
2 Using a coaxial cable, connect one of the splitter’s two output jacks to the SXRD projection TV’s CABLE jack.
3 Using a coaxial cable, connect the splitter’s other output jack to the VCR’s VHF/UHF IN jack.
4 Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack.
5 Using A/V and S VIDEO cables, connect the satellite receiver’s AUDIO and S VIDEO OUT jacks to the VCR’s AUDIO and S VIDEO IN jacks.
6 Using A/V and S VIDEO cables, connect the VCR’s AUDIO and S VIDEO OUT jacks to the SXRD projection TV’s AUDIO and S VIDEO IN jacks.
7 Run Auto Program, as described in “Setting Up the SXRD Projection TV Channel List” on page 60.
46