Setting Up the SXRD Projection TV

DVD Player with

Use this hookup if:

S VIDEO and Audio

❑

Your DVD player does not have component (Y, PB, PR) jacks.

Connectors

 

 

 

Disconnect all power sources before making any connections.

 

1

Using an audio cable, connect the DVD player’s AUDIO OUT jacks to

 

 

the SXRD projection TV’s AUDIO IN jacks.

 

2

Using a S VIDEO cable, connect the DVD player’s S VIDEO jack to the

 

 

SXRD projection TV’s S VIDEO jack.

Rear of SXRD projection TV

S VIDEO

SVIDEO cable

DVD player

TV Projection SXRD the Up Setting

AUDIO-R VIDEO

Cables are often

color-coded to connectors.

AUDIO-L

Connect red to red,

white to white, etc.

A/V cable

✍If your DVD player is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.

✍To watch the DVD player, press TV/VIDEO repeatedly to select the DVD input (VIDEO 1 in the illustration). If you have a non-Sony DVD player, and want to set up the TV remote control to operate the DVD player you must program the remote control. See “Programming the Remote Control” on page 64.

✍To control DVD functions with the TV remote control, see “Operating a DVD Player” on page 67.

✍To label video inputs to easily identify equipment connected to the TV, see the instructions for setting up Video Labels on page 123.

49