Setting Up the SXRD Projection TV
SXRD Projection TV Front Panel and Connectors
Front Panel
C H A N N E L
3
#
V O L U M E
3
#
LAMP | STANDBY | TIMER | POWER/STANDBY |
T V / V I D E O
POWER
STD / DUO
1 2 3 45678
9
0
qa
Item | Description |
1 LAMP LED | Lights up in red when the lamp for the light source has |
| burned out. For details, see “Replacing the Lamp” on |
|
2i.LINK STANDBY When lit in red, indicates that i.LINK Standby is on. For
LED | details, see page 123. |
3Memory Stick When lit, indicates that the Memory Stick is being read.
indicator | (Do not remove the Memory Stick when the indicator is |
| lit.) |
4Memory Stick slot For inserting Memory Stick media to view on your SXRD projection TV. For details, See “Inserting and Removing a Memory Stick” on page 84.
5 TIMER LED | When lit, indicates one of the timers is set. When the |
| timer is set, this LED will remain lit even if the TV set is |
| turned off. For details, see page 125. |
|
|
6 (IR) Infrared | Receives IR signals from the remote control. |
Receiver |
|
|
|
7 POWER/ | Blinks and then lights up in green when the TV set is |
STANDBY LED | turned on. When in standby mode, the LED lights up in |
| red. The LED does not light up when the AC power cord |
| is not connected to the outlet. If the red LED blinks |
| continuously, this may indicate the display unit needs |
| servicing (see “Contacting Sony” on page 129). When the |
| red LED blinks only three times, the lamp cover is not |
| attached securely (see page 23). |
|
|
26