Reattach the Front Panel Cover securely and tighten the two screws underneath the cover.
Press firmly.
✍ Consult your Sony dealer for a Sony XL-5000 replacement lamp.
✍ Take great care when replacing the lamp or plugging in/unplugging the connecting cords. Rough handling may cause the SXRD projection TV to fall, damaging the TV, the TV stand and/or the floor.
23
Introducing the Sony SXRD Projection TV
Making sure the black pin on the back of the lamp cover goes into the |
| |
hole on the TV, put the cover back on. Slide the knob to the right until v | Sony the Introducing | |
matches V, and then tighten the screw. | ||
| ||
The pin is on the back of the | SXRD | |
lamp cover. Gently push the | ||
cover until the pin locks into | ||
place. | Projection | |
✍ If the lamp cover screw is inserted incorrectly, the lamp may not | ||
TV | ||
operate properly. In such a case, remove the screw, insert it | ||
| ||
correctly and then tighten the screw completely. |
| |
✍ If the lamp cover is not reattached securely, the |
| |
function may be triggered and the POWER/STANDBY indicator |
| |
flashes three times (see page 137). |
|
6