Setting Up the SXRD Projection TV

Cable and Antenna For best results, use this connection if you:

❑Have a cable and an antenna.

(This is convenient if you are using a separate rooftop antenna to receive additional channels that are not provided by your cable TV company.)

❑Do not have a cable box or VCR. (If you have a cable box, see pages 37 and 38. If you have a VCR, see pages 41 and 42.)

Antenna and CATV cable

Cable Type

Connect As Shown

 

Cable TV

 

 

 

(CATV) and

Antenna cable

CATV cable

Antenna

 

 

 

Notes on Using This Connection

 

To Do This ...

 

Do This ...

 

Switch the SXRD projection

Press ANT to switch back and forth between the

TV’s input between the cable

SXRD projection TV’s VHF/UHF and CABLE

and antenna

 

inputs.

 

✍For optimum picture quality, a 75-ohm coaxial cable antenna connection is highly recommended. Radio waves and other interference can easily affect a 300-ohm twin lead cable, resulting in signal deterioration. If you use a 300-ohm twin lead cable, keep it as far away as possible from the SXRD projection TV.

✍Do not use an indoor antenna, which is especially susceptible to radio noise.

36