Introducing the Sony SXRD Projection TV

3 Insert the four screws pre-attached to the speaker into the screw holes on the rear of the TV, turn the screws clockwise, and tighten them to secure the speaker to the TV.

Rear of SXRD projection TV

Black pin

TV Projection SXRD Sony the Introducing

4 Repeat steps 1 through 4 with the right speaker.

✍The speakers can be detached if required. If you use a multi-channel surround speaker system and there is not sufficient space to install the display unit, we recommend using the speakers detached.

✍To prevent damage to the speaker housing or terminals, do not use excessive force when attaching or detaching the speakers.

✍Be sure to first remove the speakers before moving the TV.

✍To remove dust from the transparent portions of the speakers, wipe them with a clean, soft cloth.

✍Do not connect the detached speakers to other audio equipment.

✍Place the supplied slot covers to all four corners at the rear of the TV (as shown in the following illustration) if you decide not to attach the speakers. Avoid accidental swallowing of the slot covers by children.

Top slot

Rear of SXRD projection TV

Bottom slot

19