Setting Up the SXRD Projection TV
Installing the SXRD Projection TV
Carrying Your SXRD Carrying the SXRD projection TV requires at least four people. Do not hold
Projection TV by the pedestal or the Front Panel Cover of the SXRD projection TV. Doing so may cause these parts to break off.
To carry the TV, hold it by the top and bottom of the panel.
✍Be sure to first remove the speakers before moving the TV.
✍Make sure the screws underneath the Front Panel Cover are securely tightened before moving the TV (see Step 6 on page 23).
As shown in the illustration below, two persons hold the TV by its sides and the other two by its rear panel. Each person holding the side should use both hands to grasp the bottom corners of the panel. The other two should place their hands on the top edge of the TV and the lower part of the rear panel.
30