To display and change the Label keys for timer programme numbers

Press the TIMER button repeatedly. For timer settings, see page 61.

When you select the Component name, go to Step 6.

When you select the system number or the timer programme number, go to Step 7.

6Press the INTERVAL key.

The current interval setting stays lit, and (+) and (–) flash.

7Press the (+) or (–) key to change the interval. You can control the interval from 100 to 900ms in units of 50ms.

Each time you the (+) key is pressed, the interval increases by 50 ms. Each time you the (–) key is pressed, the interval decreased by 50 ms.

(ms: 1/1000 second)

8Press COMMANDER OFF.

COMMANDER

OFF

If you keep COMMANDER OFF pressed for more than 2 seconds

The Commander turns off.

If you keep COMMANDER OFF pressed for less than 2 seconds

The Commander returns to the previous setting mode.

Continued 41