Setting the Timer (continued)
To switch quickly the timer standby mode to on or off using the TIMER button1Press the TIMER button.
The programme numbers of which timer programme is set to the standby mode stay lit, and the other programme numbers flash on the Label keys.
To change the Label keys, press the TIMER button repeatedly.
2Select the programme number of which timer standby mode you want to switch to on by pressing the Label key.
If you select the programme number which has no timer programme data, the “NG” sound is heard and “NG” flashes twice.
3Press the ON OFF key.
With a beep sound, “c” mark lights and the standby mode of the selected timer programme is set to on. The display returns to Step 1.
4Keep COMMANDER OFF pressed for more than 2 seconds to turn the Commander off.
To reset the standby mode to off, follow Steps 1 - 3 again.
Notes
•If the TEST key or the ON/OFF key is pressed when the timer programme is not set, the “NG” sound is heard twice and “NG” flashes.
•When you finish the timer setting mode after you set the timer standby mode, “c” mark stays lit beside the clock. This means that one or more timer programmes are set to the timer standby mode.
•The timer programme contents you have set on this Commander repeat every week until you set the timer standby mode to OFF (weekly timer). If you want to execute the timer programme once, set the timer standby mode to OFF after the execution of the timer programme.
IMPORTANT
The timer function of this Commander is designed for the timer operation of AV components. Do not use the timer function to operate an
68